Changes in 1.8.5.0 (25/4/2022) ----------------------------------------- - Fix for issue where chemi series images are all inverted by a checkbox in user settings - Stain Free captures are now previewed with white light Changes in 1.8.4.0 (23/2/2022) ----------------------------------------- - Added new drivers for F3/ InGenius Cameras Changes in 1.8.3.0 (4/2/2022) ----------------------------------------- - Imaging region for the InGenius3 camera increased to 5.0 MP - Fix on chemiluminescent and system protocols. - Database version 2.2 includes CS-FSG filter - Serial drivers now installed for Gnome - Bug in Dynamic Fielding for InGenius system fixed Changes in 1.8.2.0 (27/04/2021) ----------------------------------------- - Fix on protocols reading for chemi, chemi series and SAC. Old-style protocols sometimes being overwritten by default settings. - Database version 2.1 incliudes StarBright Blue dye - Scroll Bars sometimes not appearing in Image Edit screen, now fixed. - Fix on the thumbnail generation. Resources being used but not release leading to memory issues. - TIFF files can now be saved as a single image “As Captured” - Memory management improved further. - Fix for button updating in manual multiplex capture. Changes in 1.8.1.0 (30/03/2021) ----------------------------------------- - Fix for issue when swapping between capture and non-capture screens. Resources were being used but not released. Changes in 1.8.0.0 (02/11/2020) ----------------------------------------- - Improvements of the "save as" functionality (tree view, more stable) - Refactoring of the Chemi Series operation - Binning introduction for Chemi Fluorescent and Gel Fluorescent - Dye Selection screen removed for chemi operations - Automatic Inversion for chemi images - Introduced backup mechanism for configurations - Image Enhancement - General Improvements on memory management - Atik camera drivers updated to latest version Changes in 1.7.2.0 (18/12/2019) ----------------------------------------- - Fix for issue with saving of files "As Displayed". Previous version did not take changes in brightness/ contrast into account. Changes in 1.7.1.0 (10/12/2019) ----------------------------------------- - Fixes for issues with saving of files under 21 CFR Part 11 compliance introduced in previous version. Changes in 1.7.0.0 (26/11/2019) ----------------------------------------- - New filters and lighting added. - Addition of colour markers for chemi-blots. - Introduced feature that removes the limitation of available memory for 32bit processes in x64 architectures - Extra options in User Settings page for new chemi-blot options. - Focus Offset added for SYNOPTICS 24MM F0.8 lens used on XX6 and XX9. - Image enhancement feature added to edit screen - Save and Save As (Export for publication) methods enhanced and simplified - GUI for Lens Group changed so it is no longer floating - Saturation button now on main screen - New chemi-blot screens added: Signal accumulation calculator, chemi-rapid - Sample positioning and capture screens combined to a single screen for auto-capture. Changes in 1.6.9.0 (13/06/2019) ----------------------------------------- - Resolved issue with some Windows 10 PCs and F3 systems Changes in 1.6.8.0 (12/06/2019) ----------------------------------------- - No significant changes for this build Changes in 1.6.7.0 (08/05/2019) ----------------------------------------- - Added fluorescent blot to Simulator - Fixed issue with systems containing F3 camera where they were failing on high speed computers. - Quick Quant added to all versions Changes in 1.6.6.0 (11/03/2019) ----------------------------------------- - Added new option of inches or cm for gel sizing - Fix for G:BOX F3 system crash. - Addition of new dyes Changes in 1.6.5.0 (26/11/2018) ----------------------------------------- - Added new lens option (F0.8) - Added option to view sizing in inches - Minor bug fixes Changes in 1.6.4.0 (13/09/2018) ----------------------------------------- - Minor bug fixes Changes in 1.6.3.0 (18/07/2018) ----------------------------------------- - Added System protocols. - Re-developed the Compare images screen. - Only displaying gel/blot sizes the instrument can handle. - Stain free blot now going straight to preview. - Added autoexpose area to saved protocols. - Improvements to the touch screen controls. Changes in 1.6.1.0 (12/01/2018) ----------------------------------------- - Fixed critical issue with save paths and USB's being removed Changes in 1.6.0.0 (01/12/2017) ----------------------------------------- - New feature Quick Quant added. A screen for quantifying user-defined areas. - Fix for PXi and saving of lens settings. - Some thumbnails images do not update on change to the main image. Now fixed - Prevented multiplex composite images being inverted (invert button on enhance panel disabled if composite image being viewed) - PXi wrong converter prompts: requires white light pad rather than converter screen. Now fixed - Changing from Multiplex to Single in Series Setup can cause crash. Now Fixed - Manual, locked protocol: exposure was not locked. Now fixed - Iris is locked for blots in automatic mode for fluorescent dyes but should not be. Now fixed. - Gnome Drawer opens after capture. Now fixed - Simulator now does not have a binning factor greater than 6. - Changed reporting of iris in image info popup to show 1 decimal place rather than 2. - Changed how Stain free is selected: No longer goes through dye selection. - Increased GBOX F3 systems from 3.8MP to 5MP Changes in 1.5.9.0 (05/09/2017) ----------------------------------------- - Fixed a critical issue with text annotations Changes in 1.5.8.0 (25/08/2017) ----------------------------------------- - Added support for new G:BOX Mini systems - Added total capture time label to chemi series. - Chemi Run to completion is now hidden by default, but can be turned on via preferences. - You are now able to turn saving of lens settings off via preferences. - Added ctrl+C,V,X for copy paste cut of annotations. - Fixed an issue with Dye History and different Date layouts. - Fixed an issue with shortcut keys no longer working once printing dialog has been cancelled. - Systems that do not require a calibration file no longer report it not being loaded. - Added a fix to saved lens settings on system startup when the door is open on a lift based system. - Fixed some issues with saturation of images. - Fixed an issue with Export to publication. - Fixed a crash issue when disconnecting GeneGnome. Changes in 1.5.7.0 (02/11/2016) ----------------------------------------- - Features added for stain free multiplex capture. - Buttons added to set zoom from a saved file - Print report printed blank image if print preview switched on in basic report, now fixed. - Updated camera drivers - Fixed multiplex memory bug - Fixed 3D image printing bug - Updated status icons - Microlitre symbol can now be added to annotation text boxes - Multiple annotation text boxes can be edited at once - Annotation text box sizes now carry forward to next box - Added keyboard shortcuts for save and print Changes in 1.5.6.0 (14.07.2016) ----------------------------------------- - Added PXi 4 lens correction - Unavailable options are now hidden for GeneGnome systems - Lens defaults can now be cleared from the settings page - Moved PXi 6A to the bottom of the list in installer - Fixed bug where exposure time was sometimes changing - Fixed memory printing bug - Fixed Chemi sample positioning image being too bright Changes in 1.5.5.0 (15.04.2016) ------------------------------------------- - Added lens field correction - Added hardware simulation mode - Added Export for publication feature: displayed image can now be saved as 16-bit tif and dpi can be changed - Added support contact e-mail address to about box - Fixed "camera cooler than optimal" bug - Fixed GeneGnome iris warning bug - Fixed histogram display bug - Fixed issue with Korean characters not displaying correctly - USB 2 is no longer supported on T:Genius Changes in 1.5.4.0 (13.10.2015) ------------------------------------------- - Fixed issue with PXi 6/9 Lens not responding Changes in 1.5.3.0 (30.09.2015) ------------------------------------------- - Fixed issue with optimising Filter on PXi systems - On the preview page the filter no longer automatically moves filters if it thinks sample is bright or dark - Fixed various issues causing the T:Genius to saturate the image when auto capturing - Fixed various issues with how CFR compliance works within GeneSys - Fixed issue with changing user settings while CFR compliance is enabled - Added auto expose region of interest back to the chemi preview page - Fixed various issues with chemi capture auto expose region of interest - Fixed issue with thumbnails not updating when altering multiplex images - Added information on whether CFR compliance is enabled to the about box - The about box now shows whether a calibration file was successfully loaded - Improved display of which image in a series is being setup - Handle sizes can be increased, in user settings, for smaller displays - Upgrading GeneSys no longer shows erroneous system requirements message - Fixed various bugs with capturing neutral field images - 9MP camera now defaults to 4x4 binning - Fixed issue with adjusting the gamma on multiplex sub-images causing black spots on the composite image - Fixed issue with series with marker captures printing black image - Fixed crash when printing multiple reports - Removed erroneous message asking the user to open the iris on GeneGnome systems - The Sample Size dialog box can now be switched off in user settings - Fixed problem with being unable to stop captures before are completed - black and white level sliders can now be modified using the up and down arrows (shift and control increases movement speed) - Holding the shift or control key while changing the 3d view speeds up movement - Fixed issue with creating multiplexes from single captures producing black images - Fixed crash when selecting annotations on composite images - Removed Auto expose region of interest box from series setup - Removed histogram control from composite images - Fixed T:Genius camera disconnecting when stopping captures Changes in 1.5.2.0 (03.06.2015) ------------------------------------------- - Fixed CFR save issue. - Fixed PXi 6 filter wheel issues. - Fixed PXi 6 chemi capture issues. - Fixed Auto expose area. - Auto save is now disabled if CFR compliance is in use. - Changing black and white levels is now more responsive. - Fixed issue with T:Genius saturating using auto capture. - Fixed issue with binning level from previous captures being used. - Fixed Neutral fielding issues with T:Genius. - Fixed Neutral fielding issues with some systems using digital zoom. - Navigation labels are now shown as default after installation (this can be changed in User Settings). - Fixed issue with creating multiplex images from series sub images - Updated light converter prompts. - Fixed minor issues with autosaving captures. - After a chemi preview Changes to the camera and darkroom return the view to live mode. - In Image Edit annotation text boxes can now have multiple lines of text. - In Image Edit scrollbars have been restored. - Fixed issue with performing image processing while a multiplex image is selected. - 3D view movement speed can be increased by holding the shift and control keys. - Manuals and quick guides are now linked in the start menu and in a folder on the desktop. Changes in 1.5.0.0 (10.03.2015) ------------------------------------------- - Connection speed of Point Grey and FlexCam cameras has been improved. - Fixed Various interface issues. - Fixed issue with T:Genius not collecting Neutral Field images. - Fixed issue with anti-reflective screen and white light converter prompts. - Fixed issues with adding CFR compliance during installer. - Dynamic range can be turned off for manual/series captures. - Series captures can be group auto scaled. - Added digital zoom for PXi 6 Access and PXi 9 Access. - Default lens positions can now be saved. - Images can be autosaved after capture. - Added auto expose region of interest to manual captures. - Added sample positioning screen to GeneGnome. Changes in 1.4.6.0 (04.11.2014) ------------------------------------------- - Improved the speed when switching between certain screens. - Improved the 3D view. - Added CFR21/11 options into installer for ease of use. - Now prompted to save protocols on the manual screen when you set them up. Changes in 1.4.5.0 (07.10.2014) ------------------------------------------- - Improved the Sensitivity of some of the cameras in Chemi. - Added PXi 6 Access and PXi 9 Access. - Fixed some issues with Windows 8.1. - Some issues in the Image Edit screen have been fixed. Changes in 1.4.3.0 (22.08.2014) ------------------------------------------- - The User Preferences screen has been redesigned. - T:Genius now offers EDR as well as an option to automatically rotate the image 90 degrees. - The display can now zoom out further to make rotated images more visible and an issue with rotated cropped images has now been fixed. - You are now able to 'Apply' a rotation to an image. This will create a new rotated image. - Fixed some issues with thumbnails not showing correctly - Fixed some issues with Text Annotations not resizing properly - When doing a chemi series capture with individual times the next time now sets to the last time, not the default time. - Bands now appear as peaks in the 3D image whether they are black or white Changes in 1.4.2.0 (18.07.2014) ------------------------------------------- - Added New Systems : T:Genius and G:Box F3-UK. - Annotations have been improved, they should now be easier to use and see. - Added code to allow turning off of the auto scaling of the black and white levels of images. - Various UI improvements. - Have Fixed missing dialogs when changing manual filters and also fixed an issue with messages about 'Unknown Lighting' popping up. - There is now an option to broadcast the status on the network. This can now be set on the user settings page. - Added functionality for on screen keyboard for tablets. - Fixed a bug where series captures were being displayed in the wrong order. - Added Binning to image information control. - Reduced the amount the iris is closed per attempt for motorised lenses - Fixed an issue with not being able to move lift if no lens configured/attached. Changes in 1.4.1.0 (28.01.2014) ------------------------------------------- - Added a button on the sample positioning screen to get a better 'preview' image for chemi only. - Fix to the temperature sensor for certain cameras. - Sample size zooming now fixed for foreign systems - Added PXi 4MZ and the XX6/XX9 with alternative lens - Added new filter (Filt585) Changes in 1.4.0.0 (25.09.2013) ------------------------------------------- - The user interface has had a redesign to both make the capturing of images easier and increase the responsiveness of GeneSys. - An option has been added in user preferences to switch back to the 'Classic' home screen. - Saved Protocols are now sortable and searchable in the new interface. - Added labels on to the buttons at the bottom of the screen which can be turned on/off in User Preferences. - Load times of GeneSys should be improved. - Stain Free Imaging has been added to GeneSys. - The speed of autoexposure has been improved and should also stop overexposure on manual and motorised lenses. - You can now select an area to exclude from the autoexposure calculations in Automatic capture. - It is now possible to overlay any images and create a colour or monochrome composite. - Camera cooling now turns off after one hour if the package isn't used. Cooling is restarted when the user changes screens or goes live or grabs an image. - Time remaining (for an exposure) now shows if the exposure is > 30 seconds. Changes in 1.3.9.0 (10.05.2013) ------------------------------------------- - UltraSlim and UltraBright working in Auto Mode with Ethidium Bromide (typically in PXi systems) - Neutral field issue on PXi 4 has been fixed. Old neutral field images will be automatically replaced as used. - The PXi draw locking code has been altered; some systems weren't unlocking or locking correctly. When the draw is unlocked it must be opened far enough to register as being "open" before being closed again. - Background "noise fringing" on the GeneGnome 5 and PXi 4 has been fixed. Changes in 1.3.8.0 (25.04.2013) ------------------------------------------- - GeneGnome draw release on closing the package - Added PXi 9 to the installer Changes in 1.3.7.0 (23.04.2013) ------------------------------------------- - Fixed problems on some systems with the PXi draw not locking correctly. The draw now explicitly locks whenever it is closed. - Added GBOX Chemi-XX9 to the installer - Renamed GBOX Chemi 6 to GBOX Chemi-XX6 in the installer - After swapping lower lighting units in the PXi the light works first time rather than needing reselecting - Altered the automatic preview code for PXI's so it doesn't saturate by lowering the minimum exposure time as no mains frequency lights are fitted. If that fails a UV filter is used to reduce the light Changes in 1.3.5.0 (05.04.2013) ------------------------------------------- - "Browse Images" changed to "Load Images" to clarify functionality - Lighting on status more obvious - light bulb symbol changed - Windows 8 compatible - GBOX Chemi 6 added to the installer - GeneGnome draw unlocked on exiting GeneSys - Bug in autoexposure with PXI 6 fixed (min, max iris limits were reversed) - Fixed bug in the control and reporting of camera temperature status. - Fixed bug in swapping "trans illumination" devices. - Darkroom connections will work on any COM port number Changes in 1.3.4.0 (18.02.2013) ------------------------------------------- - The white light pad is now available as an option in the PXI - Fixed problem running saved configurations on the GeneGnome. GeneSys prompted to close draw or said the darkroom was disconnected. Changes in 1.3.3.0 (28.01.2013) ------------------------------------------- - Under some circumstances the system prompted the user warning that they were turning on the UV lights with the door/draw open when it was shut. Changes in 1.3.2.0 (23.01.2013) ------------------------------------------- - Improved automatic setting of black and white levels for chemi and fluorescence images - Fixed an issue where non "sgd" images loaded from file didn't show saturation correctly. - Logging of the Canon lens servo limits logged to atik_*****.log in c:\temp - Fixed problem with the PXi 6 system locking up when capturing automatic chemi with marker. - When using the IR6 or PXi 6a camera, the shuttered 6MP system, an extra image is captured on startup to clear the sensor. This was causing a problem with black level estimation on some systems causing the auto chemi capture to lockup. - Camera serial number are now included in printed reports - The PXi 6 system can now save and restore lens settings in User Protocols - Alteration to the CCD amplifier switching on the XR5 and GeneGnome 5 camera to minimise "glow" in the top left corner in some imaging conditions Changes in 1.3.1.0 (05.12.2012) ------------------------------------------- - Fixed crash issue with the PXi 6 and calibration files. - Reversed the focus of the PXi 6 lens to bring it in line with all other lenses. Changes in 1.3.0.0 (03.12.2012) ------------------------------------------- - Added support for PXi 4 & 6. - You can now run a Chemi to completion. - GeneSys is now compliant with CFR 21 Part 11 (if switched on). - You are now able to assign your own colours to Multiplex images. - Reworked the annotations and added further functionality (multiple select, align, delete, copy and paste). - Now able to copy an image with its annotations to the clipboard (to be pasted in Paint or PowerPoint etc...). - The Browse Image screen has been redesigned, Images can be sorted by Date as well as Image name, the user can track which images have been selected from multiple different directories and remove them from the list, Network folders can now be accessed, browsed and opened from within Genesys to allow images from the network to be opened and scrutinized. We have also fixed a problem with forwarded Desktop directories in the browse screen. Also any sgd file that is a Multiplex or Series should be marked as so. - Added a Gamma control. - Made visual improvements to the compare images. - Stopping an auto-chemi permits a visible marker to still be captured. - Added the ability to add delays between captures in Manual capture (series only). - Improved screen layouts for lower resolutions. - Added new Hardware programming pages rather than the dialog that was displayed before. - Time estimates for Auto Expose and Chemi should now be improved. Changes in 1.2.10.0 (11.10.2012) ------------------------------------------- - When saving user configurations, the interface now reflects the interface on the home screen. Also fixed an issue when attempting to overwrite an existing configuration. - Fixed the odd behaviour of the information button when notes are added to an image. - Fixed an issue with autoexpose in auto chemi series capture. - Fixed an issue with the region of interest having become solid yellow on the sample positioning screen. - Fixed an issue to allow chemi capture to be stopped. - Fixed an issue with the F3 Camera when changing the binning. The image should no longer jump around. Changes in 1.2.9.0 (19.09.2012) ------------------------------------------- - You can now add notes to an image - The Histogram control now permanently display the white and black levels of the image. - GeneSys now supports the PXi 5 - Add contents of previous page now defaults to true on the Chemi Series Setup screen - The notepad 'style' and tiling approach for user configuration has been changed. Instead, a horizontal selectable control can be used in the same manner. The details displayed on the configuration tiles have been simplified, showing only dyes/types, who created it and the name of the configuration. - Fixed issue with the system randomly crashing when using a ghostbuster file - The Gel grid is now restricted to the image view area and the grid can be moved as a whole - The sub image list should now be able to minimise to show more of the image. - Exposure time information is now displayed as minutes and seconds, not just seconds. - Fixed crash issue with InvalidOperationException on ScaletoRangeGivenSourceRange. Changes in 1.2.8.0 (09.08.2012) ------------------------------------------- - Updated database - Fixes for door locking issues on some systems - Fixed issue with GeneSys not writing log files on some versions of Windows Changes in 1.2.7.0 (20.07.2012) ------------------------------------------- - Improved usability at reduced vertical resolution. - Send to GeneTools only allows saving in SGD format. - Optional Flexcam offset control added Changes in 1.2.6.0 (29.06.2012) ------------------------------------------- - Flexcam controller software updated to resolve connection issues. - User protocols for autochemi capture with markers improved Changes in 1.2.5.0 (26.01.2012) ------------------------------------------- - Flexcam drivers now correctly signed (64 bit drivers now working correctly). - Public configurations can now only be deleted by the creator. - G:Box F3 camera is now correctly displayed as a 3.8MP camera. - User can now set the basic report to print the image only. Changes in 1.2.4.0 (12.01.2012) ------------------------------------------- - Updated and digitally signed the Flexcam drivers. - Added Captured field to image information. Changes in 1.2.3.0 (16.12.2011) ------------------------------------------- - Fixed the problem with neutral field correction and LED lighting. - Alterations to black level calculation for Neutral Fielding with "shuttered cameras". - Changes to the autoexpose code to fix problems with the Kodak full frame sensors. If grossly overexposed the output signal level dropped too far. - Digitally signed the executables and the Flexcam drivers. Changes in 1.2.2.0 (02.12.2011) ------------------------------------------- - Added GBox F3 and Ingenius 3 systems. - Various memory usage fixes. - Added fix for autoexpose area with visible marker in chemi capture. - Removed support for Lumenera camera due to issues with their drivers. - Now able to change system without reinstalling Start -> Syngene -> Support -> Select System. - No longer switching lights off when connecting to darkroom as it messes up the hardware testing. Changes in 1.2.0 (21.10.2011) ------------------------------------------- - Added support for the GeneGnome (HR and 5) and Ingenius (L, LHR & LHR²). - Created a new Chemi Series option in Automatic capture. - Neutral fielding has been improved and will now also work with multiplexed images. - Dye history is now limited to displaying the 10 most recent items. - We have changed the wording of the save message dialogs. - The 5MP camera now bins to 2x2 for autocapture. - The XX8 system has been speeded up. - Added direct link from Load Images to Edit Images. - Save protocol now has checkbox to decide whether to save the lift position to the protocol for those systems that include a lift. - Genesys will now function better at lower (below minimum specification) vertical resolutions. - Altered the saving of displayed image so it is possible to save as tif, bmp and jpg. - Unlocking the darkroom door if camera is lost or capture cancelled. - Added GeneSys manual. - Added a program to help collect GeneSys Log Files to aid support. - Removed the need for a security key. - Updated the 'Create Multiplex' button image. - Fixed an issue with camera temperatures. - Added a warning on the manual screen for when exposure goes above 5 seconds and the live view stops. - Added 'Light On For Chemi Preview' setting in Settings. Changes in 1.1.2 (11.07.2011) ------------------------------------------- - Fixed issues with the installer reporting negative memory in Windows 7. - Fixed focus tracking on the XT4 systems. - Processed image data now being saved correctly. - Dialog to change the lighting modules now shown on top of the 'Optimising System' message. - Thumbnails now generated from the currently active image (Original or Processed). - Added GeneGnome 5 as an option in the installer. - if .Net 3.5 SP1 is missing, and it is present in the support directory, the user will be asked if they wish to install it. Changes in 1.1.0 (30.06.2011) ------------------------------------------- - Neutral fielding available for EPI led modules. This uses a Neutral Density filter. - Speed of the display should be noticeably faster. - The feedback lens control has been redesigned to make it easier to use. - Added Undo function to Edit Images screen - Added user preferences screen - Changed the way the hardware (lighting and filters) screen works. - When selecting a LED module that is not plugged into the darkroom, you are prompted to insert the module. - Full reporting added - Now able to select a printer to print to. - Can now hold down Control key to force drawing of straight lines for NEW lines and arrows - Updated Histogram to allow changing of black and white levels via the red lines. - Now able to define a gel grid to cut out areas of the image as new separate images. - Improved memory usage with the XML database - Preview now available when you have set up a series or multiplex capture in the manual screen. - Changed Range control to hopefully be easier to grab on a touch screen - Added cancel button to TLUM, Converter screen and LED Module insertion dialogs. Pressing this should cancel the capture. - Added fix for showing saturation on Live images. - Fixed issues with text not printing vertical, text not printing black and saved printer settings not being used. - When defining an area to crop, the zoom and range controls disappear. Also minimum size of the crop area is now set to 10x10 pixels. - Added prompt to add anti-reflective plastic (and remove it) for LED Modules. - Flip and Speckle correct now create 'processed' image. - Added an Invert button to the Display Control. - Can now press escape while on one of the 3 capture screens while capturing to cancel the capture. - Added LY800 and Neutral Density filters - Full Dye Search back in - Darkroom images now updated to new style darkroom. - Rotate and reset button images updated. - Fixed an issue with Dyes being enabled when you don't have hardware available for them. - Added Support for Manual darkrooms (such as InGenius). - Fixed rare problem with reprogramming of old unsupported filters. - Various other bugs now fixed. Changes in 1.0.9 (12.04.2011) ------------------------------------------- - Various bug fixes and more logging added. Changes in 1.0.7 (25.02.2011) ------------------------------------------- - Added Gamma to 3D Display. - Added Range Reset to Display. - Fixed issue with French and Polish systems and the Lens Control. - Fixed problem with Manual Lens Systems not working. - Fixed correction of non-Atik cameras. - Now supports camera calibration with the U8. - Dyversity 6 now supports both manual and automatic lenses. Changes in 1.0.6 (15.02.2011) ------------------------------------------- - 3D View now works better with colour maps (the model should no longer change). - Saturation should once again be working correctly. - Improved the memory usage when dealing with large images. - Polygon annotations now work better. - You can now send non sgd images to GeneTools. Changes in 1.0.5 (10.02.2011) ------------------------------------------- - Added support for XX8. - Better support for Dyversity 6. - Reduced CPU useage and sped up the system. - Various bug fixes. - Added more filters. Changes in 1.0.4 (21.12.2010) ------------------------------------------- - Improved the Focus slider with a feedback lift. - For a multiplexed set of dyes, if some sets only contain trans and other only contain Epi lighting, then the software chooses EPI's in preference and hides the TRANS options and vice versa. - Various small bug fixes. Changes in 1.0.3 (16.12.2010) ------------------------------------------- - Improved memory usage. - Renamed Sybr Gold filter to SGNB. Renamed UV033 filter to UV033-3. - Various small bug fixes. Changes in 1.0.2 (15.12.2010) ------------------------------------------- - Added Support for G:Box Darkrooms with Fixed or Slider Filters. - Fixed issue with some Feedback Lenses not focusing correctly. - Lens control now easier to make small adjustments. - Now displaying image range information on both the image information and range slider tooltip. - Manual Screen now includes options from the accessories screen. Initial Release 1.0.0 (06.12.2010) ------------------------------------------- - Initial Release of GeneSys featuring support for G:Box with Filter Wheel, Lift, Motorised or Feedback Lenses etc.